 clutch suggestions, clutch what kind to buy? |
  |
 Feb 9 2010, 04:34 PM
Post
#1
|
|
|
Group: Members Posts: 40 Joined: 29-January 10 From: Searcy Ar  |
alright guys im new so dont kill me, but i have an ls1 car an i need some suggestions as to what kind of clucth to purchase.
I also need to know if i should refurbish my stock flywheel or just get a new one the clucth an flywheel i have got around 140k on them so its starting to fade. It doesnt slip it just gets really hot and wont engage at all when i get above 5500 rpm in any gear, it doesnt slip or chatter at all though. |
 |
|
|
Feb 9 2010, 04:47 PM
Post
#2
|
|
 AR Rides fastest street car  Group: Vendors Posts: 1,349 Joined: 24-April 08 |
LS7 is a good choice if the car is around 400rw or less.
--------------------  01 C5 Vert, Tripple black M6 -----------HOME OF THE QUICKEST C5 IN ARKANSAS------------ 9.81@139.8 MPH BAD BOYZ RACING KK PERFORMANCE |
|
|
|
|
Feb 9 2010, 05:56 PM
Post
#3
|
|
 Dragon Group: Purple Team Posts: 1,647 Joined: 18-September 07 |
ls7 would be good, i also had good luck with the spec 3+ i would think you should be fine just getting your stock flywheel resurfaced.
--------------------  trex, 4.30's, moser 9in, m6 w/tex twin, KKP tune 1000ft track. 1/8th mile 7.05@98 full weight |
|
|
|
|
Feb 9 2010, 07:39 PM
Post
#4
|
|
|
Group: Members Posts: 40 Joined: 29-January 10 From: Searcy Ar |
QUOTE(Ren @ Feb 9 2010, 05:56 PM)  ls7 would be good, i also had good luck with the spec 3+ i would think you should be fine just getting your stock flywheel resurfaced. Thank you both ill try the ls7 an spec 3 an ill compare prices. The car is mostly stock just a tune an exhaust |
|
|
|
|
Feb 9 2010, 07:57 PM
Post
#5
|
|
 I'm really a Fr0d guy... And a dragracer...  Group: Administrators Posts: 1,903 Joined: 8-December 08 From: ONABOAT |
Ls7 is good choice.
--------------------  |
|
|
|
|
Feb 10 2010, 07:22 AM
Post
#6
|
|
|
Group: Members Posts: 286 Joined: 25-April 09 From: Cabot |
Here is some info on getting that ls7 clutch, it was copied from a GTO web site. Not sure if it's the cheapest way to go, but it should help you.
||--Genuine GM C6 Z06 LS7 Clutch Kit--|| 24248985 – LS7 Clutch 12571611 – LS7 Flywheel Both LS7 Clutch and LS7 flywheel are 441.42 For both clutch and flywheel on our website, use part number ls7clutchkit under Chevrolet make. 92067762 - GTO Slave Cylinder – 240.48 14061685 – Pilot Bearing – 12.79 *Clutch does work in any LS1/LS2 drivetrain but must also have ls7 flywheel. http://www.gmpartshouse.com/ This post has been edited by Lamoogle: Feb 10 2010, 07:24 AM -------------------- PBM 06 GTO M6...
97 Trans Am   |
|
|
|
|
Feb 13 2010, 12:14 PM
Post
#7
|
|
|
Group: Members Posts: 40 Joined: 29-January 10 From: Searcy Ar |
QUOTE(Lamoogle @ Feb 10 2010, 07:22 AM) Here is some info on getting that ls7 clutch, it was copied from a GTO web site. Not sure if it's the cheapest way to go, but it should help you. ||--Genuine GM C6 Z06 LS7 Clutch Kit--|| 24248985 – LS7 Clutch 12571611 – LS7 Flywheel Both LS7 Clutch and LS7 flywheel are 441.42 For both clutch and flywheel on our website, use part number ls7clutchkit under Chevrolet make. 92067762 - GTO Slave Cylinder – 240.48 14061685 – Pilot Bearing – 12.79 *Clutch does work in any LS1/LS2 drivetrain but must also have ls7 flywheel. http://www.gmpartshouse.com/ thanks lamoogle that info was helpful think im going with spec 3 its cheaper an comes w to bearing an flywheel |
|
|
|
|
Feb 15 2010, 04:45 PM
Post
#8
|
|
|
Group: Members Posts: 40 Joined: 29-January 10 From: Searcy Ar |
QUOTE(t56speed @ Feb 13 2010, 01:14 PM) thanks lamoogle that info was helpful think im going with spec 3 its cheaper an comes w to bearing an flywheel hey lamoogle ended up with an ls7 got it cheap it was 350 on line with clutch fly an to bearing also got pilot bearing with the kit i got lucky and caught a sale thanks for all the info |
|
|
|
|
Feb 16 2010, 06:11 AM
Post
#9
|
|
 SLOWEST LS1 EVA! Group: Members Posts: 739 Joined: 22-October 07 From: RAF Lakenheath |
QUOTE(t56speed @ Feb 13 2010, 07:14 PM) thanks lamoogle that info was helpful think im going with spec 3 its cheaper an comes w to bearing an flywheel I bought my LS7 clutch kit, IIRC mine came w/ TO bearing and a flywheel. KYspeed is doing a GP or sale right now I think or go with KKP, he can buy them for you and install it. --------------------  Z28 | M6 swap by KKP | Bolt ons | HPTuners | FROST tuned | 243 heads | EPS lobe- 222/226- 113 LSA 2004 BS G35 sedan~ 5AT |
|
|
|
| ARRides |
Post
#
|
 Support Arrides |
|
|
|
|
|
| Lo-Fi Version | Time is now: 3rd September 2010 - 04:31 PM | |
| IP.Board Skin Developed By Creative Networks | ||